GOC5702163-CT - Interior Renovations

Scope of Work/Overview:

• Demolition of gypsum board on walls and ceiling
• Removal of selected voice and data drops that are in excess of what is required in the room; and removal of supply air ducting and diffusers that are in excess of what is required for the room.
• Relocate electrical receptacles to suit the new room layout and install additional power receptacles.
• Install empty electrical raceways for Owner supplied security system.
• Install expanded metal wire mesh to cure the walls to RCMP standards. Inspection to take place by consultant and client prior to drywall is installed.
• Replace existing steel door and door frame. Door is swing into the hallway.
• Fabricate new door frame to accommodate new electric strike and card reader and partial astragal to protect door locking system.
• Supply and install inline exhaust fan with timer control switch.
• Supply and install drywall after security mesh has been inspected by the Departmental Representative.
• Prepare, prime and paint drywall.
• Retain, strip, and clean the existing resilient sheet flooring, and apply multiple coats of wax.
• Install new mill work and stainless-steel countertops as shown on the Project Drawings.
• Supply and install a new firearm cleaning system within the new equipment room. Supply the new BIO-Circle firearm cleaning system with Bio-friendly cleaning solution and make ready for use.
• Relocate the firearm unload station that will be provided by the client. Wall mount the unit on the pre-existing concrete block wall.