GOC2553068-CT - Roof Replacement

Full replacement of existing deteriorated asphalt shingles, on the multi-elevation roof assembly, is required at the facility. The intent of the project is to protect the integrity of the structures & mitigate the risk of future damage to interior finishes. Supply all materials & labour necessary for new main building roof. Scope includes: remove/strip existing shingles, including fasteners & roofing membrane. Inspect eaves & fascia for replacement & inspect sheathing after removal of existing shingles. Ensure surface is firm & dry, without ridges, warps or voids & properly fastened. Any damaged sheathing is to be identified during demolition & BGIS Project Manager to be notified immediately in order to secure approval to replace damaged sheathing. Replace missing 'H' clips as necessary. Vent pipes & other accessories projecting through the roof must be in place & appropriate roof flashings installed prior to shingling. Installation of full waterproof underlayment (ice and water shield) is to be performed over the entirety of all roof surfaces prior to shingling occurs (as per client request). New asphalt shingles to match as closely as possible with existing. At eaves, use a starter course of shingles, tabs reversed, overhang 1/2". Install ridges & roof vents prior to shingling and nail as per manufacturer's directions. Shingles to be Architectural style, individually tabbed strip shingle, mineral surfaced asphalt with fiberglass felts having a 30 year manufacturer's warranty at a minimum. Contractor to replace all eavestrough. Estimated Roof dimensions are as follows: Entryway to main building 13' x 6'; Main Roof 40' x 40'. NOTE: The contractor is responsible to confirm these dimensions on-site. Also note that the roofs are low slope (pitch).